C 60 U
This series was developed based on the C series machines, primarily for manufacturing spiral-cut bevel gears using Klingelnberg's Zyklo-Palloid® method. With this system, the main focus is on simple, on-target production of spiral bevel gears with an extremely small tool volume for the application area of ring gears with a diameter up to 600 mm.
| Range of Application | continuous indexing | single indexing |
|---|---|---|
| Workpiece Data | ||
| Workpiece diameter (max.) |
Ø 600 mm | |
| Normal module range |
2.4 – 13 mm |
upon request |
| Tooth width (max.) |
100 mm | |
| Pitch cone angle range |
0° – 90° | |
| Smallest/largest gear ratio |
1:1/1:10 | |
| Smallest/largest number of teeth |
6/180 | |
| Axial offset |
± 60 mm | |
| Spiral angle range |
0° – ca. 60 ° | |
| Tool Data | ||
| Cutter head diameter |
- |
7.5“ – 14“ |
| Cutter head radii/number of starts of the Zyklo-Palloid® universal- and HPG-S cutter heads |
100/5; 135/5; 170/5 mm |
- |
| Cutter Head Spindle (A axis) | ||
| Cutter head spindle speed (max.) |
100 rpm | |
| Workpiece Spindle (B axis) | ||
| Bore hole of the spindle mount |
Ø 200 mm | |
| Workpiece spindle opening |
Ø 190/650 mm long | |
| General Machine Data | ||
| Total connected load |
80 kVA | |
| Machine dimensions (L x W x H) approx. |
6,200 x 5,050 x 3,200 mm | |
| Net weight approx. |
37,000 kg | |
| Range of Application | ||
|---|---|---|
| Workpiece Data | ||
| Workpiece diameter (max.) | Ø 600 mm | |
| Normal module range | 2.4 – 13 mm | |
| Tooth width (max.) | 100 mm | |
| Pitch cone angle range | 0° – 90° | |
| Smallest/largest gear ratio | 1:1/1:10 | |
| Smallest/largest number of teeth | 6/180 | |
| Axial offset | ± 60 mm | |
| Spiral angle range | 0° – ca. 60 ° | |
| Tool Data | ||
| Cutter head diameter | - | |
| Cutter head radii/number of starts of the Zyklo-Palloid® universal- and HPG-S cutter heads | 100/5; 135/5;170/5 mm | |
| Cutter Head Spindle (A axis) | ||
| Cutter head spindle speed (max.) | 100 rpm | |
| Workpiece Spindle (B axis) | ||
| Bore hole of the spindle mount | Ø 200 mm | |
| Workpiece spindle opening | Ø 190/650 mm long | |
| General Machine Data | ||
| Total connected load | 80 kVA | |
| Machine dimensions (L x W x H) approx. | 6,200 x 5,050 x 3,200 mm | |
| Net weight approx. | 37,000 kg | |
The above-mentioned maximum values were determined for industry-typical gear units.
If necessary it has to be examined whether maximum values can be combined.
Subject to changes.
