Highlights
OERLIKON Bevel Gear Cutting Machine C 60
Efficient machine design
- Suitable for dry and wet processing
- Integrated deburring
- Complete integration in the closed loop system
- Optimized for face hobbing and face milling
C 60
The C 60 bevel gear cutting machine covers the upper application range of the C series. It is used for cutting bevel gearboxes for heavy-duty trucks and tractors, and has the same well-tried design as every C machine. In the C 60, special emphasis was placed on high static and dynamic rigidity. A look at the large, extremely stiff machine components makes this apparent. And the proof is in the gear-cutting performance and quality.
| Range of Application | continuous indexing | single indexing |
|---|---|---|
| Workpiece Data | ||
| Workpiece diameter (max.) |
Ø 630 mm | |
| Normal module range |
3.5 – 10 mm | |
| Tooth width (max.) |
100 mm | |
| Smallest/largest spiral angle |
0°/60° | |
| Smallest/largest number of teeth |
6/180 | |
| Smallest/largest gear ratio |
1:1/1:10 | |
| Tool Data | ||
| Cutter head diameter |
88 – 181 mm |
7.5“ – 18“ |
| Cutter Head Spindle (A axis) | ||
| Seating diameter: Gleason outer cone, No. 14; 1:24 |
Ø 58.227 mm | |
| Cutter head spindle speed (max.) |
330 rpm | |
| Workpiece Spindle (B axis) | ||
| Seating diameter: Oerlikon inner cone No. 80; 1:16 |
Ø 203.218 mm | |
| Workpiece spindle opening |
Ø 190 mm/650 mm long | |
| Workpiece spindle speed (max.) |
450 rpm | |
| General Machine Data | ||
| Total connected load |
100 kVA | |
| Machine dimensions (L x W x H) approx. |
6,165 x 3,600 x 3,200 mm | |
| Net weight approx. |
35,000 kg | |
| Range of Application | ||
|---|---|---|
| Workpiece Data | ||
| Workpiece diameter (max.) | Ø 630 mm | |
| Normal module range | 3.5 – 10 mm | |
| Tooth width (max.) | 100 mm | |
| Smallest/largest spiral angle | 0°/60° | |
| Smallest/largest number of teeth | 6/180 | |
| Smallest/largest gear ratio | 1:1/1:10 | |
| Tool Data | ||
| Cutter head diameter | 88 – 181 mm | |
| Cutter Head Spindle (A axis) | ||
| Seating diameter: Gleason outer cone, No. 14; 1:24 | Ø 58.227 mm | |
| Cutter head spindle speed (max.) | 330 rpm | |
| Workpiece Spindle (B axis) | ||
| Seating diameter: Oerlikon inner cone No. 80; 1:16 | Ø 203.218 mm | |
| Workpiece spindle opening | Ø 190 mm/650 mm long | |
| Workpiece spindle speed (max.) | 450 rpm | |
| General Machine Data | ||
| Total connected load | 100 kVA | |
| Machine dimensions (L x W x H) approx. | 6,165 x 3,600 x 3,200 mm | |
| Net weight approx. | 35,000 kg | |
The above-mentioned maximum values were determined for industry-typical gear units.
If necessary it has to be examined whether maximum values can be combined.
Subject to changes.
