C 30

OERLIKON Bevel Gear Cutting Machine


Highly efficient, environmentally friendly dry-cutting

Thanks to continuous further development of the vertical concept, the Oerlikon C 30 bevel gear cutting machine sets new standards in dry processing. All of the bevel gear machines in this series are equipped with a thermostable, vibration-damping machine bed. The cutting machine utilizes an optimized axis arrangement, resulting in reduced traversing paths that significantly reduce the load on the drive components and stiffen the structure of the overall system at the same time. An integrated deburring tool also provides maximum productivity and maximum process safety using the PULSAR method. Use of the optional Power Skiving method makes it possible to achieve even greater machine flexibility and productivity.


  • Continuous further development of the vertical concept with minimal traversing paths
  • New materials with optimal attenuation properties while providing an extremely stiff structure and thermal stability
  • Integrated deburring in the same clamping as for gear cutting
  • New operating software with touchscreen display and clear screen layout
  • Vertical spindle arrangement makes clamping device changes easy
  • Optional Power Skiving of internal and external gearing by means of cylindrical monoblock tools
  • Optimal energy efficiency (e2) thanks to recovery and on-demand control of units
Range of Application continuous indexing single indexing
Workpiece Data
Workpiece diameter (max.)

Ø 280 mm

Normal module range

1.5 – 6.5 mm

Tooth width (max.)

58 mm

Smallest/largest spiral angle

0°/60°

Smallest/largest number of teeth

6/180

Smallest/largest gear ratio

1:1/1:10

Tool Data
Cutter head diameter

39 – 105 mm

3,25“ – 7,5“

Number of blade groups (continuous)

5 – 19

-

Cutter Head Spindle (A axis)
Seating diameter: Gleason outer cone, No. 14; 1:24

Ø 58.227 mm

Cutter head spindle speed (max.)

1,500 rpm

Workpiece Spindle (B axis)
Seating diameter: Oerlikon outer cone 1:4

Ø 140.11 mm

Seating diameter: Oerlikon inner cone No. 39; 1:19,764

Ø 99.258 mm

Workpiece spindle opening

Ø 93 mm

Workpiece spindle speed (max.)

1,500 rpm

General Machine Data
Total connected load

40 kVA

Machine dimensions (L x W x H) approx.

4,500 x 3,410 x 2,900 mm

Net weight approx.

20,000 kg

Range of Application
Workpiece Data
Workpiece diameter (max.) Ø 280 mm
Normal module range 1.5 – 6.5 mm
Tooth width (max.) 58 mm
Smallest/largest spiral angle 0°/60°
Smallest/largest number of teeth 6/180
Smallest/largest gear ratio 1:1/1:10
Tool Data
Cutter head diameter 39 – 105 mm
Number of blade groups (continuous) 5 – 19
Cutter Head Spindle (A axis)
Seating diameter: Gleason outer cone, No. 14; 1:24 Ø 58.227 mm
Cutter head spindle speed (max.) 1,500 rpm
Workpiece Spindle (B axis)
Seating diameter: Oerlikon outer cone 1:4 Ø 140.11 mm
Seating diameter: Oerlikon inner cone No. 39; 1:19,764 Ø 99.258 mm
Workpiece spindle opening Ø 93 mm
Workpiece spindle speed (max.) 1,500 rpm
General Machine Data
Total connected load 40 kVA
Machine dimensions (L x W x H) approx. 4,500 x 3,410 x 2,900 mm
Net weight approx. 20,000 kg

The above-mentioned maximum values were determined for industry-typical gear units.
If necessary it has to be examined whether maximum values can be combined.

Subject to changes.

C 30 Brochure English
(PDF, 5 MB)
C 30 Technical Data Sheet English
(PDF, 518 KB)
1/6
*Compulsory field
Your local sales representative will be found below locations.
KLINGELNBERG AG
Binzmühlestrasse 171
8050 Zürich, Switzerland
Fon: +41 44 278 7979
Fax: +41 44 273 1594
KLINGELNBERG GmbH
Peterstrasse 45
42499 Hückeswagen
Fon: +49 2192 81-0
Fax: +49 2192 81-200
KLINGELNBERG GmbH
Industriestrasse 19
76275 Ettlingen, Germany
Fon: +49 7243 559-0
Fax: +49 7243 599-165
www.klingelnberg.com marketing@klingelnberg.com © 2019  KLINGELNBERG