P 350

KLINGELNBERG Precision Measuring Center


Cutting-Edge Technology for Maximum Safety and Precision

The fully automatic CNC-controlled P 350 precision measuring center is designed for the workpiece diameter range up to 3800 mm. The machine is used to inspect a wide range of cylindrical gear designs, as well as large bevel gearings and worm gears.


  • Fast and accurate measurement acquisition, combined with a high-precision workpiece turntable
  • A wide range of measurement tasks in a single clamping, suitable for coordinate, shape, gear tooth and roughness measurements
  • Versatile scanning 3D tracer head with digital measurement acquisition in all coordinate directions
  • High basic accuracy with low tolerances
  • Simple graphical programming environment and simple software operating concept
  • Tremendous time savings due to quick availability of measuring results
Range of Application
General Data
Module (min. – max.)

1 – 100 mm

Horizontal measuring range (rolling path X axis)

± 300 mm

Smallest/largest helix or lead angle

0°/90°

Gear outer diameter with rotatable leveling table

0 – 3,800 mm

Permissible test gear weight (max.)

20,000 kg

Vertical measuring range (Z axis)

1,200 (1.500, 2.000) mm

Gear seating diameter with rotatable leveling table

220 – 1,000 mm

Chart recording magnification

50; 100; 200; 500; 1,000; 2,000 x

Chart length magnification

0.5; 1; 2; 4; 5; 10; 20 x

Operating voltage

± 15 % from the nominal voltage

Total connected load approx.

6,5 kVA

Compressed air connection

6 bar / 60 l/h

Measuring Accuracy in Observance of +20
Gear measurement according to VDI/VDE 2612 sheet 1 and 2 as well as 2613

Group I

Shaft measurement according to VDI / VDE 2617 sheet 2.1

U1 = 2 + L/250

Concentricity and axial runout according to DIN/ISO 1101

< 1 μm

General Machine Data
Net weight incl. standard equipment, approx.

20,000 kg

Machine dimensions incl. counterholder (L x W x H) approx.

5,310 x 2,485 x 3,885 mm

Range of Application
General Data
Module (min. – max.) 1 – 100 mm
Horizontal measuring range (rolling path X axis) ± 300 mm
Smallest/largest helix or lead angle 0°/90°
Gear outer diameter with rotatable leveling table 0 – 3,800 mm
Permissible test gear weight (max.) 20,000 kg
Vertical measuring range (Z axis) 1,200 (1.500, 2.000) mm
Gear seating diameter with rotatable leveling table 220 – 1,000 mm
Chart recording magnification 50; 100; 200; 500; 1,000; 2,000 x
Chart length magnification 0.5; 1; 2; 4; 5; 10; 20 x
Operating voltage ± 15 % from the nominal voltage
Total connected load approx. 6,5 kVA
Compressed air connection 6 bar / 60 l/h
Measuring Accuracy in Observance of +20
Gear measurement according to VDI/VDE 2612 sheet 1 and 2 as well as 2613 Group I
Shaft measurement according to VDI / VDE 2617 sheet 2.1 U1 = 2 + L/250
Concentricity and axial runout according to DIN/ISO 1101 < 1 μm
General Machine Data
Net weight incl. standard equipment, approx. 20,000 kg
Machine dimensions incl. counterholder (L x W x H) approx. 5,310 x 2,485 x 3,885 mm

* Correction values in case of a deviating temperature as per preparatory letter.

Subject to changes.

The machine dimensions of the standard version are for orientation only. The final machine dimension / final space requirement depends on the individual configuration of the machine.
P 350 Brochure English
(PDF, 3 MB)
1/10
*Compulsory field
Your local sales representative will be found below locations.
KLINGELNBERG AG
Binzmühlestrasse 171
8050 Zürich, Switzerland
Fon: +41 44 278 7979
Fax: +41 44 273 1594
KLINGELNBERG GmbH
Peterstrasse 45
42499 Hückeswagen
Fon: +49 2192 81-0
Fax: +49 2192 81-200
KLINGELNBERG GmbH
Industriestrasse 19
76275 Ettlingen, Germany
Fon: +49 7243 559-0
Fax: +49 7243 599-165
www.klingelnberg.com marketing@klingelnberg.com © 2019  KLINGELNBERG