C 60 U

OERLIKON U Bevel Gear Cutting Machine


Simple bevel gear production with extremely small tool volumes

This series was developed based on the C series machines, primarily for manufacturing spiral-cut bevel gears using Klingelnberg's Zyklo-Palloid® method. With this system, the main focus is on simple, on-target production of spiral bevel gears with an extremely small tool volume for the application area of ring gears with a diameter up to 600 mm.


  • 6-axis CNC machine for highly efficient bevel gear cutting
  • Well-tried axis concept for compact design
  • Universal tool system provides maximum flexibility
  • Short retooling times thanks to ergonomic machine design
  • Unrivaled gearing and surface quality
  • Energy efficient (e2)
Range of Application continuous indexing single indexing
Workpiece Data
Workpiece diameter (max.)

Ø 600 mm

Normal module range

2.4 – 13 mm

upon request

Tooth width (max.)

100 mm

Pitch cone angle range

0° – 90°

Smallest/largest gear ratio

1:1/1:10

Smallest/largest number of teeth

6/180

Axial offset

± 60 mm

Spiral angle range

0° – ca. 60 °

Tool Data
Cutter head diameter

-

7.5“ – 14“

Cutter head radii/number of starts of the Zyklo-Palloid® universal- and HPG-S cutter heads

100/5; 135/5;

170/5 mm

-

Cutter Head Spindle (A axis)
Cutter head spindle speed (max.)

100 rpm

Workpiece Spindle (B axis)
Bore hole of the spindle mount

Ø 200 mm

Workpiece spindle opening

Ø 190/650 mm long

General Machine Data
Total connected load

80 kVA

Machine dimensions (L x W x H) approx.

6,200 x 5,050 x 3,200 mm

Net weight approx.

37,000 kg

Range of Application
Workpiece Data
Workpiece diameter (max.) Ø 600 mm
Normal module range 2.4 – 13 mm
Tooth width (max.) 100 mm
Pitch cone angle range 0° – 90°
Smallest/largest gear ratio 1:1/1:10
Smallest/largest number of teeth 6/180
Axial offset ± 60 mm
Spiral angle range 0° – ca. 60 °
Tool Data
Cutter head diameter -
Cutter head radii/number of starts of the Zyklo-Palloid® universal- and HPG-S cutter heads 100/5; 135/5;170/5 mm
Cutter Head Spindle (A axis)
Cutter head spindle speed (max.) 100 rpm
Workpiece Spindle (B axis)
Bore hole of the spindle mount Ø 200 mm
Workpiece spindle opening Ø 190/650 mm long
General Machine Data
Total connected load 80 kVA
Machine dimensions (L x W x H) approx. 6,200 x 5,050 x 3,200 mm
Net weight approx. 37,000 kg

The above-mentioned maximum values were determined for industry-typical gear units.
If necessary it has to be examined whether maximum values can be combined.

Subject to changes.

The dimensions of the standard version are for orientation only. Swivel ranges for doors, operating panels etc. are not taken into account here. The final space requirement depends on the individual configuration of the machine.
C 60 U Technical Data Sheet English
(PDF, 567 KB)
1/4
*Compulsory field
Your local sales representative will be found below locations.
KLINGELNBERG AG
Binzmühlestrasse 171
8050 Zürich, Switzerland
Fon: +41 44 278 7979
Fax: +41 44 273 1594
KLINGELNBERG GmbH
Peterstrasse 45
42499 Hückeswagen
Fon: +49 2192 81-0
Fax: +49 2192 81-200
KLINGELNBERG GmbH
Industriestrasse 19
76275 Ettlingen, Germany
Fon: +49 7243 559-0
Fax: +49 7243 599-165
www.klingelnberg.com marketing@klingelnberg.com © 2019  KLINGELNBERG