C 60 U

OERLIKON U Bevel Gear Cutting Machine


Simple bevel gear production with extremely small tool volumes

This series was developed based on the C series machines, primarily for manufacturing spiral-cut bevel gears using Klingelnberg's Zyklo-Palloid® method. With this system, the main focus is on simple, on-target production of spiral bevel gears with an extremely small tool volume for the application area of ring gears with a diameter up to 600 mm.


  • 6-axis CNC machine for highly efficient bevel gear cutting
  • Well-tried axis concept for compact design
  • Universal tool system provides maximum flexibility
  • Short retooling times thanks to ergonomic machine design
  • Unrivaled gearing and surface quality
  • Energy efficient (e2)
Range of Application continuous indexing single indexing
Workpiece Data
Workpiece diameter (max.)

Ø 600 mm

Normal module range

2.4 – 13 mm

upon request

Tooth width (max.)

100 mm

Pitch cone angle range

0° – 90°

Smallest/largest gear ratio

1:1/1:10

Smallest/largest number of teeth

6/180

Axial offset

± 60 mm

Spiral angle range

0° – ca. 60 °

Tool Data
Cutter head diameter

-

7.5“ – 14“

Cutter head radii/number of starts of the Zyklo-Palloid® universal- and HPG-S cutter heads

100/5; 135/5;

170/5 mm

-

Cutter Head Spindle (A axis)
Cutter head spindle speed (max.)

100 rpm

Workpiece Spindle (B axis)
Bore hole of the spindle mount

Ø 200 mm

Workpiece spindle opening

Ø 190/650 mm long

General Machine Data
Total connected load

80 kVA

Machine dimensions (L x W x H) approx.

6,200 x 5,050 x 3,200 mm

Net weight approx.

37,000 kg

Range of Application
Workpiece Data
Workpiece diameter (max.) Ø 600 mm
Normal module range 2.4 – 13 mm
Tooth width (max.) 100 mm
Pitch cone angle range 0° – 90°
Smallest/largest gear ratio 1:1/1:10
Smallest/largest number of teeth 6/180
Axial offset ± 60 mm
Spiral angle range 0° – ca. 60 °
Tool Data
Cutter head diameter -
Cutter head radii/number of starts of the Zyklo-Palloid® universal- and HPG-S cutter heads 100/5; 135/5;170/5 mm
Cutter Head Spindle (A axis)
Cutter head spindle speed (max.) 100 rpm
Workpiece Spindle (B axis)
Bore hole of the spindle mount Ø 200 mm
Workpiece spindle opening Ø 190/650 mm long
General Machine Data
Total connected load 80 kVA
Machine dimensions (L x W x H) approx. 6,200 x 5,050 x 3,200 mm
Net weight approx. 37,000 kg

The above-mentioned maximum values were determined for industry-typical gear units.
If necessary it has to be examined whether maximum values can be combined.

Subject to changes.

C 60 U Technical Data Sheet English
(PDF, 567 KB)
1/4
*Compulsory field
Your local sales representative will be found below locations.
KLINGELNBERG AG
Binzmühlestrasse 171
8050 Zürich, Switzerland
Fon: +41 44 278 7979
Fax: +41 44 273 1594
KLINGELNBERG GmbH
Peterstrasse 45
42499 Hückeswagen
Fon: +49 2192 81-0
Fax: +49 2192 81-200
KLINGELNBERG GmbH
Industriestrasse 19
76275 Ettlingen, Germany
Fon: +49 7243 559-0
Fax: +49 7243 599-165
www.klingelnberg.com marketing@klingelnberg.com © 2019  KLINGELNBERG