G 60

OERLIKON Bevel Gear Grinding Machine


Economical concept for high-precision final machining of bevel gears

Thanks to its outstanding grinding performance and universal design, this CNC-controlled bevel gear grinding machine from the G model series is an extremely economical concept for high-precision final machining of the curved-toothed spiral bevel gears of any gearing system as well as face-type clutches. These machines operate up to a ring gear diameter of 600 mm, and have a vertical grinding spindle.


  • CNC machine for high-precision final machining of the curved-toothed bevel gears of any gearing system as well as face-type clutches
  • Vertical grinding spindle for optimal, unobstructed downward chip flow
  • Ring gear diameters to 600 mm
  • Easy access to all additional components, including oil mist extraction system, grinding oil return pump and hydraulics
  • Minimal setup times
  • Grinding wheel profiling takes place under CNC path control with diamond dressing roll
  • Ideally suited for automatic loading
  • Energy efficient (e2)
Range of Application
Workpiece Data
Workpiece diameter (max.)

Ø 600 mm

Normal module range

2 – 12 mm

Basic angle setting range

± 90°

General Data
Axial offset over and under center

± 100 mm

Spiral angle range (at the tooth center)

0° – 60°

Grinding spindle speed (max.)

4,500 rpm

Dressing spindle (max.)

6,000 rpm

Workpiece Spindle (B axis)
Seating diameter: Oerlikon inner cone No. 80; 1:16

Ø 203.218 mm (8“)

Workpiece spindle rotation speed (max.)

40 rpm

Tool Data
Grinding wheel diameter

Ø 100 mm (4“) – 406 mm (16“)

Tool Spindle
Eccentric speed (max.)

3,800 rpm

Nominal grinding wheel drive rating

22 kW

Workpiece Spindle
Work spindle bore

Ø 150 mm, L = 740 mm

General Machine Data
Total connected load

55 kVA

Machine dimensions without filtration unit (L x W x H) approx.

3,650 x 2,310 x 3,350 mm

Net weight without filtration unit approx.

19,500 kg

Range of Application
Workpiece Data
Workpiece diameter (max.) Ø 600 mm
Normal module range 2 – 12 mm
Basic angle setting range ± 90°
General Data
Axial offset over and under center ± 100 mm
Spiral angle range (at the tooth center) 0° – 60°
Grinding spindle speed (max.) 4,500 rpm
Dressing spindle (max.) 6,000 rpm
Workpiece Spindle (B axis)
Seating diameter: Oerlikon inner cone No. 80; 1:16 Ø 203.218 mm (8“)
Workpiece spindle rotation speed (max.) 40 rpm
Tool Data
Grinding wheel diameter Ø 100 mm (4“) – 406 mm (16“)
Tool Spindle
Eccentric speed (max.) 3,800 rpm
Nominal grinding wheel drive rating 22 kW
Workpiece Spindle
Work spindle bore Ø 150 mm, L = 740 mm
General Machine Data
Total connected load 55 kVA
Machine dimensions without filtration unit (L x W x H) approx. 3,650 x 2,310 x 3,350 mm
Net weight without filtration unit approx. 19,500 kg

The above-mentioned maximum values were determined for industry-typical gear units.
If necessary it has to be examined whether maximum values can be combined.

Subject to changes.

G 60 Technical Data Sheet English
(PDF, 594 KB)
G 60 Brochure English
(PDF, 2 MB)
1/5
*Compulsory field
Your local sales representative will be found below locations.