T 60

OERLIKON Bevel Gear Testing Machine


Highly flexible testing of hard, finished, and green spiral-bevel and hypoid gear sets

The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for fully automatic hard and soft testing of spiral-bevel and hypoid gear sets with a 90° shaft angle. It offers a wide range of objective and subjective testing options, with speeds of up to 3,250 rpm and maximum brake torque of 95 Nm.


  • CNC machine for highly flexible testing of hard, finished, and green spiral-bevel and hypoid gear sets
  • Ring gear diameters up to 500 mm (600 mm optional)
  • Shaft angle 90° (79° - 101° optional)
  • Mechanical-pneumatic clamping system with clamping stroke monitoring > no hydraulics
  • Suitable for automatic loading
  • Automatic temperature compensation (Y and Z axis)
  • Highly flexible parameterization of the testing sequence
  • Measurement method: runout testing, single flank test (SFT), structure-borne noise
  • Continuous measurement recording and evaluation
  • SFT tolerances for meshing harmonic defined relative to the measured first tooth mesh order
  • Energy efficient (e2)
Range of Application T 60 Standard T 60 Option
Workpiece Data
Workpiece diameter (max.)

Ø 500 mm

Ø 600 mm (only with standard 90°)

General Data
Distance Y (H) axis ring gear spindle front pinion spindle

150 – 350 mm

200 – 400 mm

Distance Z (J) axis pinion spindle front ring gear spindle

120 – 340 mm

Hypoid adjustment in X (V) axis

± 70 mm

Shaft angle

90°

79° – 101°

Pinion Spindle Headstock
Speed range, infinitely

0 – 3,250 rpm

Torque

57-21 Nm at n = 1,240 – 3,250 rpm

Inner cone

cone #39

cone #50

Reduction sleeve

-

cone #50 to #39

Draw-in force for workpiece clamping device (max.)

23,000 N

Ring Gear Spindle Headstock
Speed range, infinitely

0 – 3,000 rpm

Torque

93-24 Nm at n = 750 – 3,000 rpm

Inner cone

cone #39

-

Reduction sleeve

-

cone #39 to #14

Draw-in force for workpiece clamping device (max.)

23,000 N

Machine dimensions with Elbaron (oil mist collector) (L x W x H) approx.

2,350 x 2,240 x 2,500 mm

Range of Application
Workpiece Data
Workpiece diameter (max.) Ø 500 mm
General Data
Distance Y (H) axis ring gear spindle front pinion spindle 150 – 350 mm
Distance Z (J) axis pinion spindle front ring gear spindle 120 – 340 mm
Hypoid adjustment in X (V) axis ± 70 mm
Shaft angle 90°
Pinion Spindle Headstock
Speed range, infinitely 0 – 3,250 rpm
Torque 57-21 Nm at n = 1,240 – 3,250 rpm
Inner cone cone #39
Reduction sleeve -
Draw-in force for workpiece clamping device (max.) 23,000 N
Ring Gear Spindle Headstock
Speed range, infinitely 0 – 3,000 rpm
Torque 93-24 Nm at n = 750 – 3,000 rpm
Inner cone cone #39
Reduction sleeve -
Draw-in force for workpiece clamping device (max.) 23,000 N
Machine dimensions with Elbaron (oil mist collector) (L x W x H) approx. 2,350 x 2,240 x 2,500 mm

The above-mentioned maximum values were determined for industry-typical gear units.
If necessary it has to be examined whether maximum values can be combined.

Subject to changes.

T 60 Technical Data Sheet English
(PDF, 596 KB)
1/3
*Compulsory field
Your local sales representative will be found below locations.
KLINGELNBERG AG
Binzmühlestrasse 171
8050 Zürich, Switzerland
Fon: +41 44 278 7979
Fax: +41 44 273 1594
KLINGELNBERG GmbH
Peterstrasse 45
42499 Hückeswagen
Fon: +49 2192 81-0
Fax: +49 2192 81-200
KLINGELNBERG GmbH
Industriestrasse 19
76275 Ettlingen, Germany
Fon: +49 7243 559-0
Fax: +49 7243 599-165
www.klingelnberg.com marketing@klingelnberg.com © 2019  KLINGELNBERG